The model 7000 is an straight thru ( 180º) regulator and the model 7001 is an angle (90º) regulator. The assemblies can be done with needle valves and/or high pressure hose connectors or hose assemblies. These regulators are used in high pressure L.P. gas installations with portable cylinders. These regulators have been approved under NOM 018/4 and U.L. 144 standards. The needle valves can be upon request, U.L. or U.L.c. approved. The hose connectors and hose assemblies are approved by U.L. 569 | |||||||||||||||||||||||||||||||||
Model 7000FZC4H36MP4FF6 Straight regulator with hard nose pol on inlet side and a 36" length hose connector with 3/8" swivel f flare end fitting on outlet side. |
|||||||||||||||||||||||||||||||||
Model 7000FXC4H36MP4FF6 Straight regulator with soft nose full flow pol on inlet side and a 36" length hose connector with 3/8" swivel f flare end fitting on outlet. |
|||||||||||||||||||||||||||||||||
Model 7000FXV212E4H36FF6 Straight regulator with soft nose full flow pol on inlet side and a needle valve model 212 with a 36" length hose connector with 3/8" swivel f flare end fitting on outlet. |
|||||||||||||||||||||||||||||||||
Model
7000FXV212E4H36MP2 Straight regulator with soft nose full flow pol on inlet side and a needle valve model 212 with a 36" length hose connector with 1/8" mnpt, orifice end fitting on outlet. |
|||||||||||||||||||||||||||||||||
Model 7000FC2-V212E4H36FF6 Straight regulator with a type 1 connection -appliance side-mod. CRP-1BH on inlet side and a needle valve model 212 with a 36" length hose connector with 3/8" swivel F flare end fitting on outlet. |
|||||||||||||||||||||||||||||||||
Model 7001FSV212E4H36FF6 Right angle (90º) regulator with soft nose full flow pol and handwheel on inlet side and a needle valve model 212 with a 36" length hose connector with 3/8" swivel f flare end fitting on outlet. |
|||||||||||||||||||||||||||||||||
|